IS DistributionsEnquireEntryPass N6400
EntryPass N6400 is an active network access-control panel reference with 100,000 published card-holder capacity, 200,000 event-memory entries, up to 8 configurable inputs and 4 dry-contact outputs. Review the reader layout, software and selected package before choosing quantity for a supply-only enquiry.
EntryPass · Full reference: EntryPass N6400
Choose quantityManufacturer reference
Manufacturer details describe the cited version. Confirm the exact unit and intended system.
Controller capacity and network
- Device class
- Active Network Control Panel
- Processor
- 32-bit Freescale ColdFire processor at 60 MHz, as described in the model datasheet.
- Operating temperature
- 0 °C to 40 °C. Confirm enclosure, site conditions and installation requirements.
- Card-holder capacity
- 100,000 card holders as a published reference; confirm the installed firmware and system configuration.
- Event memory
- 200,000 events in the published table. Retention and system operation require confirmation.
- Configurable inputs
- Up to 8 digital/supervised inputs; confirm the selected functions and wiring.
- Relay outputs
- Up to 4 dry-contact relay outputs. Counts do not establish lock power, current or switching ratings.
- Network port
- 10/100 Mbps RJ-45 Ethernet with TCP/IP listed. No PoE supply capability is established.
- Status indicators
- Power, communication, LAN, event and error indicators are listed.
Monitoring and system functions
- AC-fail monitoring
- AC-fail monitoring is listed; confirm the connected power supply and monitoring circuit.
- Battery monitoring
- Firmware-controlled threshold monitoring can shut down the panel. Confirm battery, charger and threshold configuration.
- Reader short-circuit protection
- The protection scope is stated as the readers. This is not a complete system protection or lock-power rating.
- Clock-battery scope
- The on-board battery is described for the real-time clock only, not backup operation of the panel, locks or readers.
- Published dimensions
- 170 × 110 mm (W × H), board only. Confirm enclosure dimensions, depth, terminals and cable clearance separately.
- Web configuration
- A built-in web server is listed. Confirm supported configuration functions, current firmware and secure network access.
- Active communication
- ActiveTransmit and ActiveDownload are listed. Confirm server integration; no network latency or delivery guarantee is implied.
- Door interlocking
- On-board and cross-board interlocking are listed. The selected layout and safe egress must be checked by qualified personnel.
- Car-park mode
- Car-park mode is listed; it is not a complete barrier, vehicle-detection or payment system.
- Reader-location configuration
- Dynamic reader-location configuration is listed. Confirm actual supported readers and port assignment.
- Operation profiles
- Dynamic operation profiles are listed; choose and verify the application configuration.
- Anti-passback
- Peer-to-peer global anti-passback is listed. Confirm reader direction, system topology and configured rules.
- Encryption selection
- AES is listed. Verify supported firmware, key management and configuration; this is not a security certification or a claim that all interfaces are encrypted.
Reader, package and selection references
- Ordering and package selection
- The sheet lists EP.N6400 as an ordering reference. Confirm the actual enclosure, supply unit, readers, locks and accessories separately.
- DC supply voltage
- 12 VDC is listed. Confirm the complete supply and load design; this is not a verified reader/lock current budget.
- Dynamic storage allocation
- Dynamic storage allocation is listed; it does not establish unlimited storage or performance.
- Secondary storage reference
- The memory row lists a 2 GB microSD card as secondary storage. Confirm supplied media, supported revisions and replacement requirements; inclusion and upgrades are not assumed.
- Card-number format
- A 10-digit card system is listed. This does not establish card frequency, credential security or reader compatibility.
- Event-based triggering
- Event-based triggering is listed. Confirm the available events, actions and firmware configuration.
- User counting
- Card-holder/car-park user counting is listed. Confirm counters, readers, layout and operating rules.
- Entry-reader layout
- A four-entry-door mode with one entry reader per door is specified. This is not four doors with separate entry and exit readers.
Selection notes
- This reference is limited to EntryPass N6400 in its own manufacturer datasheet. Confirm the supplied revision, reader arrangement, firmware, software and ordered package. Published capacities are references, not an ISD compatibility, safety or supply approval.
- Readers, locks, enclosure, power supplies, batteries, software licences and installation are separate selections. Diagrams and photos do not confirm package contents or all illustrated readers operating simultaneously.
- Wiegand, OSDP, AES and interlocking are not blanket third-party compatibility, secure-channel, certification or safe-egress approvals. A qualified person must verify the actual firmware and complete system.
- Unresolved reader-count/layout, surge-unit and electrical-budget details must be confirmed before a design is accepted. The RTC battery does not back up door operation.
- ISD supplies products only. Confirm stock, price, lead time, actual ordered package and local warranty separately.
Official documents
Manufacturer source checked 2026-10-20. The supplied unit and local terms require confirmation.