DS-3E1106P-EI/M
Hikvision DS-3E1106P-EI/M 4 Port Fast Ethernet Smart POE Switch manufacturer reference
Hikvision · Full reference: DS-3E1106P-EI/M
Choose quantity
Manufacturer reference
Manufacturer details describe the cited version. Confirm the exact unit and intended system.
- Product type
- 4 Port Fast Ethernet Smart POE Switch
- Shell
- Metal material
- Net Weight
- 0.27 kg (0.6 lb)
- Gross Weight
- 0.77 kg (1.7 lb)
- Dimensions (W × H × D)
- 121.1 mm × 27.6 mm × 83.1 mm (4.77'' × 1.09'' × 3.27'')
- Operating Temperature
- 0 °C to 40 °C (32 °F to 104 °F)
- Storage Temperature
- -40 °C to 85 °C (-40 °F to 185 °F)
- Operating Humidity
- 5% to 95% (no condensation)
- Relative Humidity
- 5% to 95% (no condensation)
- Power Supply
- 54VDC, 0.92A
- Installation Mode
- Desk-Mounted,Wall-Mounted
- Max. Power Consumption
- 50 W
- Power Consumption in Idle
- 1.8 W
- Surge Protection
- 6 kV
- Ports
- 4 × 10/100 Mbps PoE port,2 × 10/100 Mbps RJ45 port
- MAC Address Table
- 2 K
- Switching Capacity
- 14 Gbps
- Packet Forwarding Rate
- 10.42 Mpps
- Internal Cache
- 1 Mbits
- Long Range
- Ports 1 to 4: up to 300 m.; Long range performance may vary depend on camera model or cable condition
- VIP Port
- Ports 1 to 2: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient
- Port Isolation
- Ports 1 to 4: port isolation mode to improve network security; Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group
- PoE Watchdog
- Ports 1 to 4: auto detect and restart the cameras that do not respond
- Link Aggregation
- Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.; Support static link aggregation.; Support 2 aggregation groups
- Loop Prevention
- Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.; Support 802.1D STP.; Support 802.1w RSTP
- VLAN
- VLAN is used for network scale planning and network health improvement.; Support 802.1Q.; Configurable VLAN ID from 1-4094.; Support Trunk, Access port mode.; Support Max. 32 VLAN
- HPP
- Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate.; 2. Display the port bandwidth utilization rate.; 3. Display the PoE power usage.; 4. Display topology information.; 5. Display the alarm status.; 6. Restart ports and devices.; 7. Enable port long-rage mode.; 8. Remotely upgrade the device
- System Maintenance
- Support device management via web.; Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.; Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.; Support management via Hik-Central Pro.; Support remote management via Hik-Partner Pro.; Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.; Support 802.1ab LLDP for peer device discovery.; Support port mirroring for fault locating
- PoE Standard
- IEEE 802.3af,IEEE 802.3at
- PoE Power Pin
- End-span: 1/2(-), 3/6(+)
- PoE Port
- PoE: Ports 1 to 4
- Max. Port Power
- 30 W
- PoE Power Budget
- 45 W
- EMC
- CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
- Safety
- CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
- Chemistry
- Reach (Regulation (EC) No.1907/2006),WEEE (2012/19/EU),CE-RoHS (2011/65/EU)
Selection notes
- Specifications are from the manufacturer's official product page.
- ISD stock, price, Malaysian warranty and delivery are confirmed separately. Confirm the exact model suffix and supplied revision.
Official documents
Manufacturer source checked 2026-10-27. The supplied unit and local terms require confirmation.
IS DistributionsEnquire