Home / Products / Hikvision

iDS-7608NXI-M2/X

Hikvision iDS-7608NXI-M2/X is an eight-channel DeepinMind NVR reference with separate HDMI and VGA outputs, two gigabit network interfaces and two SATA HDD interfaces. Camera input, monitor output and analytics execution are separate specifications. Confirm compatible cameras, storage and the selected single-engine analytics mode before an ISD supply enquiry.

Hikvision · Full reference: iDS-7608NXI-M2/X

Choose quantity

Manufacturer reference

Manufacturer details describe the cited version. Confirm the exact unit and intended system.

Camera input,video and display outputs

Device class: 8-ch 1U 8K DeepinMind NVR
IP camera inputs: Up to eight IP camera inputs are listed, with a specified input-resolution limit of 32 MP. Input acceptance is not decoding or AI-processing capacity.
Incoming bandwidth: 128 Mbps is the listed incoming bandwidth. Confirm aggregate camera streams and overhead for the actual design.
Outgoing bandwidth: 256 Mbps is the listed outgoing bandwidth, separate from the incoming-camera budget.
Video formats: H.265+, H.265, H.264+ and H.264 are listed. Camera support and stream settings must be checked.
Independent monitor outputs: HDMI and VGA independent output is listed. Check the selected display mode and supported monitor.
HDMI output modes: Listed HDMI modes are 7680 × 4320 at 30 Hz, 3840 × 2160 at 60 or 30 Hz, 2560 × 1440 at 60 Hz, and 1920 × 1080 at 60 Hz. Display output does not establish multi-camera decode performance.
VGA output: 1920 × 1080 at 60 Hz is listed for VGA. It is not an 8K VGA claim.
CVBS output: One BNC output is listed at 1.0 Vp-p, 75 Ω: PAL 704 × 576 or NTSC 704 × 480. Confirm the intended monitor standard.
Synchronous playback: Eight-channel synchronous playback is listed. Actual usable playback depends on stream, codec and configuration; no conflicted decoding tuple is inferred.

Analytics roles and network compatibility

AI execution location: Separate AI-by-NVR and AI-by-camera rows are provided. Camera-side functions require suitable cameras and configuration; these locations are not interchangeable.
Analytics engine mode: The source states that one engine runs an intelligent algorithm and its mode is adjustable. Do not assume every advertised analytics mode runs concurrently.
AcuSearch reference: AcuSearch is listed in both execution locations. The camera-side row requires AcuSearch to be enabled on the camera; actual compatibility and selected mode must be confirmed.
Transport and playback controls: TLS stream transport and double verification for playback/download are listed. These features do not substitute for secure configuration or an independent security audit.
Camera event and POS references: Configurable camera VCA, ANPR, people counting and POS overlay/event recording are listed. Compatible cameras, POS devices and separate configuration are required; no live integration is supplied by this page.
Network interfaces: Two RJ45 10/100/1000 Mbps Ethernet interfaces are listed. These are not eight built-in PoE camera-power ports.
Recorder API references: ONVIF profiles S and G, SDK and ISAPI are named. Confirm each intended client and firmware rather than assuming universal interoperability.
Camera access protocols: The camera-access row names ONVIF version 2.5 and RTSP. It is a different scope from the recorder API/profile row.
Remote connection reference: 128 remote connections are listed. This does not guarantee 128 simultaneous full-resolution decodes or unlimited network bandwidth.

Storage,terminals and power

Internal disk interfaces: Two SATA interfaces for 3.5-inch HDDs are listed. Disk supply and the manufacturer compatibility list must be confirmed.
Per-drive capacity reference: Up to 16 TB for each HDD is listed. This is not confirmation of included drives, usable RAID capacity or a guaranteed retention period.
External storage interface: One eSATA interface is listed. Confirm the supported external storage configuration.
USB interfaces: One front USB 2.0 and one rear USB 3.0 interface are listed. Confirm the intended peripheral and file-system support.
Alarm terminals: Four alarm inputs and one alarm output are listed. Electrical ratings and circuit design need separate confirmation.
Audio terminals: One RCA line-level audio output and one RCA two-way-audio input are listed. No built-in microphone or speaker is inferred.
DC supply rating: 12 V DC, 5 A is the listed supply rating. It is not a measured 60 W consumption figure or a PoE output budget.
Consumption without disks: Up to 50 W without HDDs is listed. Disk load and the actual operating state must be assessed separately.
Operating environment: −10 to 55 °C and 10–90% working humidity are listed. No non-condensing or outdoor enclosure claim is added from these rows.

Selection notes

Manufacturer reference for iDS-7608NXI-M2/X only. Both retained datasheets list STD and NEU ordering variants; confirm the supplied variant, hardware, firmware, cameras, engine mode and storage. Ordering variants are not aliases or proof of simultaneous AI capacity.
ISD supplies products only. Manufacturer references do not confirm stock, price, ETA, actual contents, local warranty, authorisation or publication approval. Qualified personnel must confirm the actual system and site.

Official documents

Manufacturer source checked 2026-10-20. The supplied unit and local terms require confirmation.