DS-2AE4215ITG

Manufacturer reference

Manufacturer details describe the cited version. Confirm the exact unit and intended system.

Imaging, lens and illumination

Device class

2 MP analog PTZ camera

Image sensor

1/2.8-inch progressive-scan CMOS optical format; not a measured diagonal.

Maximum image resolution

1920 × 1080 pixels; manufacturer 2 MP imaging class. This does not assign that resolution to every switchable output standard.

Minimum-illumination conditions

Colour 0.005 lux or black-and-white 0.001 lux at F1.6 with AGC on; 0 lux requires IR. These are source conditions, not identification-distance guarantees.

Shutter-speed range

PAL and NTSC rows both list 1 s to 1/30,000 s. Exposure settings affect motion and low-light results.

Day and night filter

An IR cut filter is listed; confirm actual day/night configuration.

Optical zoom

15× optical zoom is listed; distinct from digital enlargement.

Digital zoom

16× digital zoom is listed. It does not turn the camera into a 240× optical-zoom model.

Focal-length range

4.8–72 mm lens range, corresponding to the listed 15× optical zoom.

Wide-to-tele field of view

Horizontal 57.6° to 4°, vertical 34.4° to 2.2°, diagonal 64.5° to 4.6°, from wide to tele.

Focus modes

Auto, semi-auto and manual focus modes are listed.

Aperture range

F1.6 to F3.5 is listed. The low-light F1.6 condition must not be assumed across the full zoom range.

Optical zoom time

Approximately 2.4 s from optical wide to tele in the source; not a guaranteed field response time.

IR illumination

IR supplementary light, up to 100 m in the manufacturer reference. Scene and target conditions affect usable coverage; not guaranteed identification at 100 m.

Dynamic range

At least 120 dB WDR in the image specification; not guaranteed identification in every backlit scene.

Image controls

AGC and white balance controls are listed.

Image enhancement

BLC, HLC and 3D DNR are listed.

PTZ, control and output

Pan movement

360° endless pan is listed; actual mounting and cable routing still require confirmation.

Tilt movement

-15° to 90° tilt with auto flip is listed.

Pan speeds

Manual pan 0.1–80°/s; preset pan 80°/s in the source.

Tilt speeds

Manual tilt 0.1–80°/s; preset tilt 80°/s in the source.

Proportional pan

Rotation speed can adjust according to zoom magnification. This is not proof of automatic target tracking.

Preset positions

256 preset positions are listed.

Preset freezing

Preset freezing is listed; check actual control and recorder behavior.

Patrol reference

10 patrols, up to 32 presets per patrol. This is separate from the total preset-position count.

Pattern reference

Five patterns are listed; the source describes recording time over 10 minutes for each scan. Confirm the actual duration limit; do not assume an unlimited recording period.

Park actions

Preset, patrol, pattern and pan/tilt/panorama scan actions are included in the listed park-action choices, with day/night and one-touch patrol options. Configure the required action.

Scheduled actions

The scheduled-task list includes preset, patrol, pattern, pan/tilt/panorama scans, day/night modes and zero calibration. Confirm the required schedule and control.

Power-off memory

Power-off memory is listed; not uninterrupted operation during a power cut.

Coaxial control reference

UTC control is listed, or HIKVISION-C in a previous DVR. This is a recorder-control reference, not IP-network or ONVIF capability.

RS-485 control

Half-duplex RS-485 with self-adaptive HIKVISION, Pelco-P and Pelco-D protocols is listed. Check controller, address, baud rate and wiring.

Switchable video output

TVI, AHD, CVI or CVBS video output is selectable via BNC, with PAL/NTSC composite wording in the source. This is not four simultaneous outputs or proof of identical resolution and frame rate across standards.

Privacy masks

Eight programmable privacy masks are listed.

Power, environment and selection

DC power reference

12 V DC, max. 20 W, with IR: 7 W stated within the same row. Do not add it to claim 27 W or infer PoE; confirm the actual supply and startup load.

Body dimensions

Diameter 164.5 mm × overall height 290.6 mm. The same-page body diagram agrees with the table; mounting-assembly dimensions are separate.

Weight reference

Approximately 2 kg; not a packaged shipping weight or complete mounting-assembly weight.

Operating conditions

-30 to 65 °C, humidity 90% or less, in the operating-condition row. Check actual site environment, power and mounting.

Ingress protection

IP66 for the outdoor dome is listed; not an IK impact rating or approval of every complete mounting assembly.

Transient-protection reference

The source lists TVS 4,000 V lightning, surge and voltage-transient protection. This is not a guarantee against all lightning strikes or a substitute for installation protection and earthing review.

Optional mounting references

The source lists DS-1661ZJ pendant, DS-1660ZJ gooseneck and DS-1602ZJ wall mounting examples among the optional accessories. Confirm the full assembly and required adapters; not included and not an ISD installation service.

Selection notes

• These references apply to the complete printed DS-2AE4215ITG model and the documented configuration. Confirm the supplied hardware, region, firmware, camera/recorder compatibility, output modes, power and included items.
• Manufacturer references do not confirm stock, price, ETA, local warranty, authorisation, current firmware or Malaysian compliance. ISD supplies products only.
• Disks, power equipment, memory, mounts, adapters, cables, software and recording services are not assumed included.
• Confirm the selected TVI/AHD/CVI/CVBS output with the exact recorder. No uniform per-standard frame rate, IP interface, PoE or automatic tracking is inferred.
• IR range is not an identification distance. Confirm DC power, control wiring, mounting assembly, weather protection and earthing; optical and digital zoom are different.

Official documents

• Hikvision DS-2AE4215ITG official English datasheet

Manufacturer source checked 2026-10-20. The supplied unit and local terms require confirmation.