DS-K3B801

Manufacturer reference

Manufacturer details describe the cited version. Confirm the exact unit and intended system.

General

Communication interface

TCP/IP, I/O, RS-232, RS-485

IR light detectors

24 pairs

Throughput

20 to 60 persons per minute The actual throughput is affected by the person passing rate and passing method.

MCBF

> 3,000,000 operations (DS-K3B801 series)

Power supply

100 to 240 VAC; 50 to 60 Hz

Working temperature

-10 °C to 55 °C

Working humidity

10% to 95% (No condensing)

Lane width

550 mm to 1100 mm

Barrier material

Acrylic

Pedestal material

AISI304 stainless steel with the thickness of 2 mm

Dimensions per pedestal

With packaging: 1688 mm × 348 mm × 1318 mm Without packaging: 1500 mm × 160 mm × 1010 mm

Packaged weight per pedestal

Left and right pedestal: 146.5 kg; middle pedestal: 170.4 kg

Approval

EMC (47 CFR Part 15,Subpart B; EN55032:2015,EN61000-3-2:2014,EN61000-3-3:2013,EN50130-4:2011+A1:2014) Safety (IEC 60950-1:2005(Second Edition)+Am 1:2009+Am22013, EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013) RF (47 CFR Part 15,Subpart C; EN 301 489-1 V2.1.1, EN 301 489-17 V3.1.1, EN 300 330 V2.1.1, EN 300 220-1 V3.1.1, EN 300 200-2 V3.1.1, EN 62311: 2008) Sustainability (WEEE: 2012/19/EU, REACH: Regulation(EC) No 1907/2006, RoHS: 2011/65/EU)

System

Processor

32-bit high-speed processor

Configuration

Pedestal models

DS-K3B801-L; DS-K3B801-M; DS-K3B801-R

Functions

Communication security

Manufacturer states encrypted TCP/IP communication

Anti-tailgating

Permissions validation and anti-tailgating

Lane modes

Remaining-open and remaining-closed modes selectable

Passage direction

Bidirectional entry and exit

Barrier speed

Configurable according to visitor flow

Anti-pinch response

Barrier locks or stops when a person is pinched

Anti-forced access

Locks without an open signal; withstands up to 120 Nm

Diagnostics

Self-detection, self-diagnostics and automatic alarm

Alarm events

Intrusion, tailgating, reverse passage, climbing over barrier and overstay

IP conflict detection

Supported

Remote management

Remote control and management

Online and offline operation

Supported

LED indicators

Entrance/exit indicators and a passing-status light bar

Power failure behaviour

Barrier is free when power is removed; stays open if the optional lithium battery is installed

Fire alarm response

Barrier opens automatically for evacuation when the fire alarm is triggered

Passing timeout

Cancels permission if the user does not pass within the configured duration

Scheduled operation

Opens/closes according to a schedule template

Anti-passback

Single-lane and cross-controller anti-passback

Capacity

Card capacity

Up to 60,000 non-visitor cards

Visitor card capacity

Up to 3,000 visitor cards

Event capacity

Up to 180,000 card-swiping records

Accessories

Face recognition terminal

Optional; connected via RS-232 in the typical application drawing

Selection notes

• The documented specifications apply to the cited manufacturer version. Confirm the supplied hardware, firmware and accessory configuration.
• 0; 22 April 2019. DS-K3B801 non-A series only. Left/middle/right pedestal weights and measurements are not whole-passage totals. The optional lithium battery is required for the stated hold-open behaviour on power loss.
• Readers, locks, power supplies, batteries, licences and other accessories are not assumed to be included. ISD confirms specification, compatibility, supply, price, lead time and local warranty separately.

Official documents

• Hikvision DS-K3B801 manufacturer reference

Manufacturer source checked 2026-09-10. The supplied unit and local terms require confirmation.