DS-KD8003-IME2

DS-KD8003-IME2 is a two-wire modular door-station main-unit reference with a 2 MP, 180° fisheye camera in the cited H1 2020 catalogue. The power entry names a 24 V DC two-wire arrangement with DS-KAD706. Check the complete distributor, cable, module, mounting and firmware design rather than substituting an Ethernet PoE main unit.

Hikvision · Full reference: DS-KD8003-IME2

Choose quantity
Hikvision DS-KD8003-IME2 product image
Image: Hikvision official product image

Manufacturer reference

Manufacturer details describe the cited version. Confirm the exact unit and intended system.

Product functions and interfaces

Device class
2-wire Modular Door Station-Main Unit
Camera
Low-illumination 2 MP colour CMOS, 180° fisheye camera as stated; the axis of the 180° value is not specified here.
Video streams
H.264 video with 1920 x 1080 resolution; no sub-stream profile or frame rate is established here.
Audio
Built-in omnidirectional microphone and loudspeaker; G.711U at 64 Kbps, with noise suppression and echo cancellation.
Door detection
Door-magnetic status detection, door-magnetic alarm and tampering alarm are listed; sensors and configuration require checking.
Illumination
IR supplementary illumination is listed; no numerical range is established.
Two-wire interface
Two-wire interface support is listed; existing-cable suitability and topology require design review.
Serial interface
1 half-duplex RS-485 port; signal levels, pinout and actual device compatibility must be checked.

Configuration and selection references

Door inputs and outputs
4 I/O inputs and 2 I/O outputs are listed; this is not an electrical load approval.
Power arrangement
24 V DC, power over two-wire cable with DS-KAD706 named in the manufacturer table; confirm the actual complete power design.
Power consumption
Up to 16 W in the cited table; not a connected-device power budget.
Operating temperature
-40 to 60 °C in the historical table; confirm the supplied revision and complete installation.
Operating humidity
10% to 95% in the manufacturer table; do not infer additional environmental protection.
Protection reference
IP65 reference for the appropriate complete assembled installation.
Manufacturer dimensions
98 x 99.8 x 43.9 mm in manufacturer L x W x H notation; mounting and cable clearance must be checked separately.

Selection notes

  • Only the DS-KD8003-IME2 named model card or column applies. These are historical H1 2020 UK manufacturer references, not a current supplied configuration, compatibility approval or ISD commercial promise.
  • The bare DS-KD8003-IME2 reference is not a promise of /Surface kit contents or compatibility with every two-wire installation.
  • Confirm the exact supplied version, connected equipment and commercial terms before ordering. No current ISD stock, price, delivery, included parts or local warranty is confirmed.

Official documents

Manufacturer source checked 2026-10-20. The supplied unit and local terms require confirmation.

Continue browsing