PTZ-T4225I-D
The HiLook PTZ-T4225I-D is explicitly named in the manufacturer datasheet’s complete ordering list. It is described as a 2 MP IR analogue PTZ camera with 25x optical zoom, selectable analogue video and DVR control. Review the sourced lens, motion, power and mounting references, confirm the exact supplied unit and recorder with ISD, then choose enquiry quantity.
HiLook · Full reference: PTZ-T4225I-D
Choose quantityManufacturer reference
Manufacturer details describe the cited version. Confirm the exact unit and intended system.
Manufacturer reference
- Device class
- 4-inch 2 MP 25X Powered by DarkFighter IR Analog Speed Dome
Imaging and lens
- Image sensor
- 1/2.8-inch progressive-scan CMOS as listed; confirm the supplied imaging configuration.
- Maximum resolution
- 1920 × 1080 as listed; confirm the chosen analogue format and recorder.
- Minimum-illumination reference
- Colour 0.005 lux at F1.6 with AGC ON; B/W 0.001 lux at F1.6 with AGC ON; 0 lux with IR as listed. These are source test conditions, not a colour-image guarantee in darkness.
- Shutter-speed reference
- PAL and NTSC both list 1/1 s to 1/10,000 s; confirm image and exposure settings.
- Day and night
- IR cut filter is listed; confirm the lighting and camera mode.
- Zoom reference
- 25× optical and 16× digital zoom as listed. Digital enlargement is not additional optical detail.
- Focal length
- 4.8 mm to 120 mm, 25× optical as listed; confirm required viewing coverage.
- Horizontal field of view
- 57.6° to 2.5° from wide to tele as listed; confirm the intended scene and placement.
- Focus modes
- Auto, semi-auto and manual are listed; confirm the intended control configuration.
- Aperture reference
- F1.6 to F3.5 as listed; preserve the lens and illumination conditions.
- Optical zoom speed
- Approximately 3.2 seconds from optical wide to tele as listed; not a guaranteed response time for every movement.
- IR reference
- IR supplement light up to 100 m as listed; actual range depends on scene and configuration, not guaranteed identification distance.
PTZ movement
- Pan range
- 360° endless pan as listed; confirm mounting clearances and control setup.
- Tilt range
- -15° to 90° with auto flip as listed; not a 180° mechanical-tilt claim.
- Pan speed
- Manual-control speed 0.1° to 80°/s; preset speed 80°/s as listed. These are driven PTZ speeds, not manual installation angles.
- Tilt speed
- Manual-control speed 0.1° to 80°/s; preset speed 80°/s as listed; confirm controller settings.
- Proportional pan
- Automatic rotation-speed adjustment according to zoom multiples is listed; confirm control settings.
- Presets
- 256 presets as listed; confirm required positions and operating configuration.
- Patrol scans
- 10 patrols, up to 32 presets for each patrol as listed; confirm the intended setup.
- Pattern scans
- 5 patterns, with recording time over 10 minutes for each scan as listed. Do not substitute a different edition’s total-recording-time wording.
- Park actions
- Preset, Patrol, Pattern, Pan Scan, Tilt Scan, Panorama Scan, Day Mode, Night Mode or None are listed; confirm actual configuration.
- Scheduled tasks
- Preset, Patrol, Pattern, Pan Scan, Tilt Scan, Panorama Scan, Day Mode, Night Mode, Zero Calibration or None are listed; confirm the intended operating schedule.
- Power-off memory
- Power-off memory is listed; confirm settings and actual restoration behaviour.
- PTZ status display
- PTZ status display is listed; confirm controller and display setup.
Video and control
- Frame-rate reference
- 50 Hz: 25 fps at 1920 × 1080; 60 Hz: 30 fps at 1920 × 1080 as listed. Confirm the selected signal format and compatible recorder; not an every-output-mode concurrency guarantee.
- DVR control protocol
- UTC protocol, or HIKVISION-C protocol in a previous DVR, is listed; confirm recorder compatibility. The source heading Network does not establish TCP/IP networking for this analogue camera.
- Image settings
- AGC and white balance are listed; confirm the required scene settings.
- WDR reference
- At least 120 dB WDR is listed; confirm scene and image configuration.
- Image stabilisation
- EIS is listed; confirm the intended scene and settings.
- Image enhancement
- BLC, HLC and 3D DNR are listed; confirm the actual exposure and noise-reduction settings.
- Privacy masks
- 8 programmable privacy masks as listed; confirm the required masking configuration.
- Regional focus
- Regional focus is listed; confirm the intended focus-control setup.
- Video output
- Selectable TVI / AHD / CVI / CVBS output with BNC and NTSC/PAL composite reference as listed; confirm recorder format. This does not imply four simultaneous video outputs.
- RS-485 control
- Half-duplex RS-485 with self-adaptive HIKVISION, Pelco-P and Pelco-D protocols as listed; confirm controller/wiring. Half-duplex here is serial control, not an audio or talk feature.
Power and mounting
- Power reference
- 12 V DC, maximum 20 W, with IR 7 W shown in parentheses as listed. Confirm actual supply sizing; do not treat the IR figure as a separate extra allowance or assume an included adapter.
- Dimensions reference
- Diameter 165.9 mm × 290 mm (diameter 6.5 in × 11.4 in) as listed. Confirm mounting dimensions and clearance; the inch figures are rounded source values.
- Operating conditions
- -30 °C to +65 °C (-22 °F to +149 °F), humidity 90% or less as listed; confirm the site environment.
- Menu language
- English as listed; confirm the actual firmware/menu language.
- Protection reference
- IP66 for the outdoor dome, TVS 4,000 V lightning protection, surge protection and voltage transient protection are listed. Correct installation and external protection remain necessary; this is not a direct-lightning guarantee.
- Anti-corrosion reference
- The manufacturer assigns no specific anti-corrosion protection to this model. IP66 must not be interpreted as a coastal or chemical-corrosion rating; confirm suitability separately.
- Optional mount references
- HIA-B473, HIA-B471-P, HIA-B172, HIA-B171, HIA-B471-B, HIA-B371, HIA-B471, HIA-B471-BP, HIA-B571, HIA-B173, HIA-B471-BC, HIA-B472 and HIA-B471-C are listed as optional references. Confirm the exact supplied hardware and accessory fit; not assumed included.
Selection notes
- Manufacturer references for the explicitly listed base PTZ-T4225I-D require confirmation of supplied hardware/firmware, analogue DVR compatibility, power, mounting and scene conditions.
- The cover and complete Available Model list explicitly name PTZ-T4225I-D; this reference uses only that unsuffixed model and does not declare other listed editions equivalent.
- Confirm the complete model, stock, price, ETA, supplied package and local warranty with ISD. Similar suffixes are not interchangeable.
- ISD supplies products only. Confirm mounting accessories, power, camera/recorder signal format and configuration separately.
- The cited source separately lists multiple hardware/branding editions. Confirm the actual supplied unit; the list is not a catalogue-model alias or approval to substitute.
- RS-485 half-duplex and UTC are control references. They do not establish audio, Ethernet, PoE or IP-streaming capability.
- IP66 and surge protection do not create a coastal-corrosion or direct-lightning guarantee. Confirm site conditions and mounting accessories.
Official documents
Manufacturer source checked 2026-10-18. The supplied unit and local terms require confirmation.
IS DistributionsEnquire